蜂窝梁的稳定性能研究进展

对蜂窝梁破坏模式的研究表明，失稳是其结构性能失效的重要破坏模式。为此，在回顾蜂窝梁结构特性研究的基础上，总结归纳了蜂窝梁失稳的3种主要模式：整体弯扭失稳、梁墩屈曲、畸变屈曲。结合国内外近30多年来对蜂窝梁稳定性的试验研究成果，对影响蜂窝梁稳定性的主要因素进行分析。采用蒙特卡洛法得到纯弯简支蜂窝梁弯扭失稳临界荷载的概率分布和影响因子的敏感度。将部分具有代表性的试验成果与欧洲规范EN 1993-1-1计算结果进行对比，根据中国规范GB 50068—2001《建筑结构可靠度设计统一标准》提供的抗力分项系数，计算了不同荷载组合下蜂窝梁整体弯扭失稳临界荷载的可靠度指标，为国内规范的制订提供依据。最后，总结了当前蜂窝梁稳定性研究中存在的不足，指明了进一步研究的方向。     

A comprehensive study on the size-dependent hygrothermal analysis of exponentially graded microplates on elastic foundations

Abstract

In this paper, the effects of hygrothermal conditions on various behaviors, such as bending, free vibration, mechanical and thermal buckling, of exponentially graded microplates lying on two-parameter elastic foundations are investigated. The trigonometric four-variable plate theory incorporated to the modified couple stress theory (MCST) is employed to derive the equations of motion. The present MCST contains an internal material length scale parameter, thus it can capture the size effect. The microplate is assumed to be subjected to a temperature rise and moisture concentration which are varied linearly through the thickness of the plate. Based on an exponential law, the material properties of the microplate are graded only in z direction. The equations of motion are solved analytically to obtain the displacements, stresses, eigenfrequencies and critical buckling load and temperature of the microplates. The present results are validated by comparing them with those previously published. The numerical examples reveal that considering the size effect and/or the elastic foundations leads to an increment in plate stiffness and thereby leads to a decrement in the deflection and an increment in eigenfrequency and buckling loads. It is also shown that the size effect is negligible for the thicker plate.     

Buckling Analysis of a Nanowire Lying on Winkler–Pasternak Elastic Foundation

This article studies the axial buckling of a nanowire (NW) lying on Winkler–Pasternak substrate medium with the Timoshenko beam theory. The surface effect of the NW is accounted for with the Steigmann–Ogden model. An explicit solution of the critical buckling force and its associated buckling mode are obtained analytically. The influences of the surface stress effect, the geometry of the NW, and the elastic foundation moduli on the buckling behavior are fully discussed.     

Molecular Dynamics Study of Radial Corrugation in Carbon Nanotubes

Molecular dynamics simulations of multiwalled carbon nanotubes under hydrostatic pressure are performed to elucidate the novel class of radial buckling in the systems. It is revealed by all-atom simulations that the initial circular cross section transforms into a flower-like wavy configuration at critical pressure on the order of hundreds mega pascals or less. This kind of radial buckling, called radial corrugation, originates from the competition of the three relevant energies in the system: in-plane strain energy, van der Waals interaction energy between adjacent tubes, and out-of-plane bending energy. Their possible consequences for physical properties of carbon nanotubes are also discussed.     

Thermomechanical surface instability at the origin of surface fissure patterns on heated circular MDF samples

When a flat sample of medium density fibreboard (MDF) is exposed to radiant heat in an inert atmosphere, primary crack patterns suddenly start to appear over the entire surface before pyrolysis and any charring occurs. Contrary to common belief that crack formation is due to drying and shrinkage, it was demonstrated for square samples that this results from thermomechanical instability. In the present paper, new experimental data are presented for circular samples of the same MDF material. The sample was exposed to radiant heating at 20 or 50 kW/m², and completely different crack patterns with independent eigenmodes were observed at the two heat fluxes. We show that the two patterns can be reproduced with a full 3‐D thermomechanical surface instability model of a hot layer adhered to an elastic colder foundation in an axisymmetric domain. Analytical and numerical solutions of a simplified 2‐D formulation of the same problem provide excellent qualitative agreement between observed and calculated patterns. Previous data for square samples, together with the results reported in the present paper for circular samples, confirm the validity of the model for qualitative predictions and indicate that further refinements can be made to improve its quantitative predictive capability.     

Zentrische Druckversuche an schlanken UHPC‐Stützen

Axial compression tests on slender columns – unreinforced slender columns: a taboo? – Debate on potential and risk Within the project of the Priority Programme (SPP) 1542 ”Concrete light“, which is funded by the German Research Foundation (DFG), unreinforced UHPC columns with square and rectangular cross‐section were tested under axial compression in the subproject ”Cross sectional adaption for rod‐shaped elements in compression“. The results were compared with test series of other researchers. The focus of the study was on the buckling behavior of columns with different conditions of end support. A hinged and a fixed support have been applied for these experiments. In addition to an analysis of the failure process, the results were compared with the Euler buckling load and the normal stress in consideration of second‐order effects. Concluding, advantages and disadvantages of both approaches are presented, compared, and discussed.     

考虑屈曲影响的钢筋滞回本构模型

钢筋在拉压循环荷载作用下,会产生受压屈曲现象,其应力-应变曲线呈现受压应力软化效应,传统的钢筋滞回本构模型无法对其进行描述。在Bouc-Wen模型基础上进行修正,引入屈服后刚度比调整公式,建立考虑屈曲影响的钢筋滞回本构模型,并结合Newton-Raphson迭代法给出模型详细计算流程,该模型能够同时描述刚度退化、强度退化以及受压应力软化效应等钢筋滞回特性。模型滞回特性由7个基本参数进行控制,根据所收集的钢筋单轴拉压循环试验数据,采用遗传算法对其进行参数识别。之后考虑钢筋长细比、屈服强度以及强屈比的影响,对参数识别结果进行拟合,给出各控制参数计算公式。最后通过与试验结果进行对比,验证了所提模型的有效性。     

方钢管混凝土中钢管和混凝土抗压强度研究

对于方钢管混凝土柱在轴压作用下的受力性能,国内外学者已经进行了大量的试验研究和理论分析,但常规轴压试验无法得到钢管和混凝土各自承担的轴压力。为此,提出了一种在方钢管混凝土柱试件上部设置轴力测量段的试验方法,用于直接测量轴压下方钢管混凝土柱中钢管和混凝土所承担的轴压力。通过对5个不同宽厚比的方钢管混凝土柱试件开展轴压试验,发现方钢管混凝土柱中混凝土的抗压强度与其对应的轴心抗压强度相近。将试验得到的钢管抗压强度与已有经验公式结果进行对比,发现已有经验公式可合理预测钢管的抗压强度,针对钢管的屈曲后行为和其他因素的影响需要展开更深入的研究。在试验结果的基础上,提出了方钢管混凝土柱的轴压承载力计算式,其计算结果与文献试验结果吻合良好。     

基于杆系离散单元法的单层网壳结构屈曲行为研究

离散单元法因适合处理大位移、非线性和非连续等问题而逐渐被应用于结构工程中,但采用离散单元法进行结构屈曲全过程分析还有待研究。为此,基于杆系离散单元法的基本理论和计算方法,提出离散元力控制法及离散元位移控制法,研究上述方法在结构弹性屈曲全过程分析中的特点及适用性,同时给出离散元位移控制法（力控制法不需要单独处理）对不同荷载工况的处理方法及离散元法在进行结构弹性屈曲分析时的计算流程。采用Fortran语言自编程序,对典型算例进行弹性屈曲全过程分析,与传统方法相比,该方法无需组集刚度矩阵,对几何非线性问题不需特殊处理即可模拟结构的屈曲行为,更具优越性,并通过结果对比,验证了离散单元法在单层网壳结构弹性失稳全过程分析中的有效性。     

薄板TIG堆焊屈曲变形的预测

针对TIG堆焊所引起的薄板复杂屈曲变形问题,采用基于热弹塑性理论的有限元法建立薄板焊接变形预测模型,提出了数字图像相关法对预测屈曲模型进行试验验证并设计了薄板焊接变形检测试验装置. 结果表明,基于数字图像相关技术的非接触变形检测方法能够全场动态获取堆焊屈曲变形数据,全面验证了焊接变形有限元预测模型,基于高斯热源模型、非线性瞬态热传导边界条件、材料高温性能参数等的热?力耦合热弹塑性预测模型具有较高的精度.薄板焊接变形冷却后呈马鞍形,结合动态温度场与应力场,对揭示焊接马鞍形屈曲变形机理具有重要的意义.